Nortel Networks CALLPILOT 555-7101-226 - Manual (Page 20)

703t server description Standard 1.01
20 CallPilot
Slot definition and numbering
In the following table, the term “slot” refers to the available slot openings in
the chassis, not the PCI connectors inside the server.
The slots are numbered from the bottom of the server to the top. Slot 1 is the
bottom slot in the chassis when the chassis is standing upright.
Slot number
CallPilot-assigned
board label
a
a. In CallPilot Manager applications, the CallPilot-assigned board label may
appear. This label corresponds to the slot number. For example, BRD01 refers to
the board in slot 1.
Description
Slot 7 Not used Not used
PCI slot 6
(full length) BRD06 RAID card
PCI slot 5
(full length) BRD05 Not used
PCI slot 4
(full length) BRD04 MPB96 board
PCI slot 3
(full length) BRD03 Not used
PCI slot 2
(full length) BRD02 Not used
PCI slot 1
(full length) BRD01 Not used