Nortel Networks CALLPILOT 555-7101-226 - Manual (Page 27)

November 2005 703t server description
Part 2: 703t Server Hardware Installation 27
Network requirements
Appropriate networking equipment must be available for both the CLAN
and ELAN.
The CLAN and ELAN must be properly configured for correct CallPilot
operation. To ensure correct configuration, Nortel Networks recommends
that you consult a network specialist.
Remote access connectivity
The RS-232 COM1 connector on the rear of the 703t server provides the
connection to an external dial-up modem. The modem allows administrators
and technical support personnel to administer the 703t server from a remote
location.
pcAnywhere is used to establish a remote access connection to the server.
ATTENTION
For important considerations about using the ELAN in
your network, see “About the ELAN” in CallPilot
Installation and Configuration Part 1: Installation and
Maintenance Overview (555-7101-210).