Nortel Networks CALLPILOT 555-7101-226 - Manual (Page 26)

703t server description Standard 1.01
26 CallPilot
In the previous diagram, the telephony LAN (TLAN) provides IP
connectivity between the Succession 1000 system and the i2004 Internet
phonesets. The connection between the Call Server and Media Gateway can
be point-to-point, or it can be through the LAN, if the system is installed in a
distributed data network.
For information about the Succession 1000 system and i2004 Internet
phoneset bandwidth and network requirements, refer to the Succession 1000
Planning and Installation Guide (NTP 553-3023-210).
Switch connectivity
For more details about how the 703t server and switch connection is
established, refer to the switch and server setup document for your switch:
„ CallPilot Installation and Configuration Part 3: Succession 1000 System
and CallPilot Server Configuration (555-7101-510)
„ CallPilot Installation and Configuration Part 3: Meridian 1 and
CallPilot Server Configuration (555-7101-222)
LAN connectivity
The 703t server contains two Ethernet controllers on the motherboard that
provide the following:
„ 10/100Base-T Ethernet network connectivity to the ELAN
For information about the ELAN’s purpose and requirements, see “About
the ELAN” in CallPilot Installation and Configuration Part 1:
Installation and Maintenance Overview (555-7101-210).
„ 10/100/1000Base-T Ethernet connectivity to the CLAN
The CLAN is an optional connection that provides data connectivity
among desktop and web messaging clients, administrative PCs, and the
CallPilot server.
See “Rear panel diagram” on page 16 to identify the location of network
interface connectors.