Nortel Networks ROADSTER 56K - Manual (Page 5)

�m�5�6� NetComm Roadster series 56K UsB modem 5�6� NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem
www.netcomm.com.au 5
NetComm Roadster Series 56K USB Modem
• TIA/EIA 578 Class 1 FAX send and receive speeds of 14400, 12000, 9600, 7200, 4800 or 2400bps.
VOICE/ Audio Mode
• TAM through the microphone / speaker interface on Audio Sound card
ERROR Correction
• support V. �amP, mNP -
DATA Compression
• support V.,V.bis and mNP 5
DAA Line interface Capabilities
• DTMF Tone Dial/ accurate make-break ratio Pulse Dial
• Proprietary transformer-based isolation barrier
• Programmable even detect for Caller-id reception and Power Ring detection
• Programmable AC/DC impedance termination for Return-Loss / Specific Countries homologations
FLOW Control
• Both transmit and receive fax data are buffered. Data transmission over DTE is flow controlled by XON/XOFF and RTS/CTS.
System Requirements
• Computer with Pentium �� mmX or higher processor.
• Windows 98/98SE/ME/2000/XP/Vista or 7 Operating System.
• 20 MB Hard Disk free space or above
• sound card for voice features
• 1 available UsB port.
• Cd-Rom drive.
Package Includes
The box contains the following items:
• one 56Kbps UsB modem
• one RJ11 Phone �ine Cable
• one UsB cable
• one Utility Cd with drivers and User manual
• One Quick Installation Guide
if any of these items are missing or damaged, please contact your dealer or sales representative for assistance.