Nikon Coolpix P300 - Manual (Page 192)

180
Troubleshooting
T
ec
h
n
ical
No
tes an
d I
n
de
x
Cannot record or
play back voice
memo.
• Voice memos cannot be attached to movies or pictures
recorded with easy panorama.
• Voice memos cannot be attached to pictures shot by
cameras other than COOLPIX P300, and voice memos
recorded by other cameras cannot be played back on this
camera.
57, 126
105
Pictures cannot be
edited.
• Movies cannot be edited.
• Editing is not available for pictures shot when the Image
mode was set to o 3968×2232.
• Pictures recorded with easy panorama cannot be edited.
• Confirm the conditions that are required for editing.
• Pictures taken with cameras other than COOLPIX P300
cannot be edited.
–
74
–
108
–
Pictures not
displayed on
television.
• Video mode or HDMI is not correctly set in the TV
settings setup menu.
• Cables are connected to both the HDMI mini connector
and USB/audio video connector.
• Memory card contains no pictures. Replace memory card.
Remove memory card to play back pictures from internal
memory.
155
127
22
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm that the operating system used is compatible
with the camera.
• Computer is not set to launch Nikon Transfer 2 automatically.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
19
24
130
–
129
133
The PictBridge
startup screen is
not displayed
when the camera
is connected to a
printer.
With some PictBridge-compatible printers, the PictBridge
startup screen may not be displayed and it may be
impossible to print images when Auto is selected for
Charge by computer. Set Charge by computer to Off
and reconnect the camera to the printer.
156
Pictures to be
printed are not
displayed. • Memory card contains no pictures. Replace memory card.
• Remove memory card to print pictures from internal
memory.
22
22
Cannot select
paper size with
camera.
Paper size cannot be selected from the camera in the
following situations, even for PictBridge compatible printers.
Use the printer to select paper size.
• The paper size selected using the camera is not
compatible with the printer.
• A printer that automatically sets the paper size is being
used.
137, 138
–
Problem Cause/Solution A