Indicators displayed in auto mode, Indicators displayed in a (auto) mode – Nikon Coolpix P300 User Manual

Page 37

Advertising
background image

25

Step 1 Turn the Camera On and Select A (Auto) Mode

Bas

ic Ph

otography an

d Pl

ayba

ck

: A
(Auto)

M

ode

Indicators Displayed in A (Auto) Mode

The indicators and photo info displayed during shooting and playback will turn off after a few

seconds (

A147).

When the monitor has been turned off in standby mode to save power (the power-on lamp is

blinking) (

A153), press the following buttons to turn it back on.

➝ The power switch, the shutter-release button or the b (e movie-record) button.

C

Note on the Flash

When the flash is lowered, the flash setting is fixed at off and W appears at the top of the monitor. In
situations where a flash is needed, such as in dark locations or when the subject is backlit, be sure to
raise the flash (

A33).

C

Functions Available in A (Auto) Mode

The flash mode (

A32) can be adjusted, self-timer (A35), macro mode (A38) and exposure

compensation (

A39) can be applied.

Pressing the

d button allows you to specify a combination of image quality (compression ratio)

and image size with Image mode (

A74) in the shooting menu.

D

Vibration Reduction and Motion Detection

See Vibration reduction (

A150) or Motion detection (A151) in the setup menu (A141) for

more information.

Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.

1/250

1/250

F5.6

F5.6

26

26

26

Internal memory indicator
Pictures are recorded to internal memory
(approx. 90 MB). When a memory card is
inserted, C is not displayed and pictures are
recorded to the memory card.

Aperture value (

A63)

Shutter speed
(

A63)

Shooting mode
A is displayed in
A (auto) mode.

Motion detection icon
The effects of the subject
movement and camera
shake are reduced.

Image mode
The combination of image
quality (compression ratio) and
image size is displayed. The
default setting is L 4000 × 3000.

Movie options
A movie option is displayed
for movie recording
(

A118, 123).

Vibration reduction icon
Vibration reduction can be
applied to reduce the
effects of camera shake.

Advertising