NETGEAR CG814WG V3 - Manual (Page 43)

Wireless Cable Modem Gateway CG814WG v3 Reference Manual
Managing Your Network 4-5
v1.0, June 2007
Backup Settings
The configuration settings of the gateway are stored in a configuration file in the gateway. You can
use the Backup Settings screen to work with the configuration file.
Click Backup to go to the Backup Settings screen:
You can save a copy of the current configuration settings, restore saved settings, or reset the
gateway to the factory default settings.
Restoring Saved Settings
To restore settings from a backup file:
1. Click Browse.
2. Locate and select the previously saved backup file (by default, CG814.cfg).
3. Click Restore.
• A message notifies you when the gateway has been restored to previous settings.
• The gateway restarts, which takes about one minute.
Figure 4-5
Note: When restoring or erasing settings do not interrupt the process by going on online,
turning off the gateway, or shutting down the computer.