NETGEAR CG814WG V3 - Manual (Page 60)

Wireless Cable Modem Gateway CG814WG v3 Reference Manual
A-2 Technical Specifications and Factory Default Settings
v1.0, June 2007
Factory Default Settings
You can use the reset button located on the rear panel of your gateway to reset all settings to their
factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button
for 5 seconds. The gateway will reboot and return to the settings shown in the following table.
Radio Data Rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
Auto Rate Sensing
Frequency 2.4-2.5 GHz
Operating Frequency Ranges: 2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)
Encryption: 40-bit (also called 64-bit), 128-bit WEP data encryption,
WPA-PSK(TKIP), and WPA2-PSK(AES)
Table A-1. Default Configuration Settings
Feature Default Behavior
Gateway Login
User login URL http://192.168.1.1
User name (case sensitive) admin
superuser
Login Password (case sensitive) password
Local Network (LAN)
Lan IP 192.168.1.1
Subnet Mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.1.2
DHCP Ending IP Address 192.168.1.254
DMZ Enabled or disabled
Time zone GMT
Specification Description