NETGEAR CG814WG V3 - Manual (Page 49)

Wireless Cable Modem Gateway CG814WG v3 Reference Manual
Managing Your Network 4-11
v1.0, June 2007
Display the Routing Table
This operation will display the internal routing table. This information is used by Technical
Support and other staff who understand Routing Tables.
Reboot the Router
Use this button to perform a remote reboot (restart). You can use this if the Router seems to have
become unstable or is not operating normally.
Remote Management Access
With Remote Management, you can allow a user or users on the Internet to configure, upgrade and
check the status of your CG814WG v3 Gateway.
To configure your gateway for Remote Management:
1. Click Remote Management to go to this screen:
2. Select the Allow Remote Management check box.
3. Specify the port number that will be used for accessing the management interface.
Note: Rebooting will break any existing connections either to the router or through the
router. However, connections to the Internet will automatically be re-established
when possible.
Figure 4-12