Nikon 885 - Manual (Page 60)

119 118
Refer
ence—Camera Setup
Storing Camera Settings: The Controls Menu
In CSM mode, the first three items in the
“Controls” menu determine what camera settings
remain in effect when the camera is turned off. If
an item is checked, the setting in effect at the
time the camera was turned off will be restored
the next time the camera is turned on. Any items
that are not checked will be restored to default settings when the
camera is turned on. CONTROLS
save
save
save
Digital Zoom
Done
SELECT SET BK
Option Setting Affected Default
3 save Flash setting Auto
2 save Focus mode Autofocus
! save Exposure compensation ±0.0
Digital Zoom Digital zoom On
The fourth item, “Digital Zoom”, is used to turn digital zoom on and off in ATUO,
SCENE and CSM mode. If it is checked, digital zoom functions normally (p. 90). If
this item is not checked, digital zoom cannot be used, and pressing the T zoom
button at the maximum optical-zoom position has no effect.
To check an item, or remove the check mark from an item that has already been
checked, highlight the item and press > on the Multi selector. Highlight “Done”
and press > on the Multi selector to put the changes into effect.
Confirming Shutter Release:
The Shot Confirm Lamp Menu
If desired, the red-eye reduction lamp next to the
viewfinder window can be used to let your
subjects know that the shutter has been released.
This can be useful when taking portraits without
the flash. Shot confirmation can be turned on or
off in the “Shot Confirm Lamp” sub-menu. SHOT CONFIRM LAMP
Controls
Shot Confirm Lam
Pic data/Confirm
Date
Video Mode
Language
Reset All
Off
On
SELECT SET
Option Description
Off
Red-eye reduction lamp does not light when shutter is released
(default).
On Red-eye reduction lamp lights when shutter is released.
COOLPIX885 (E) 01.10.22 6:01 PM Page 118