Nikon 885 - Manual (Page 61)

121 120
Refer
ence—Camera Setup
Photo Information and Transfer Setting:
The Pic Data/Transfer Menu
The “Pic Data/Transfer” sub-menu contains
options for storing information about the camera
status at the time when the picture was taken as
a text file and for turning on/off the transfer mark
associated with pictures and movies as they are
taken. PIC DATA/TRANSFER
Controls
Shot Confirm Lam
Pic data/Transfer
Date
Video Mode
Language
Reset All info txt
Auto Transfer
SELECT SET
Recording Photo Information: The info. txt Sub-Menu
When “On” is selected in the “info. txt” sub-menu, a text
file (“info. txt”) will be created on the CF memory card in
the camera to store picture information for all subsequent
images. When the contents of the CF memory card are
viewed form a computer, this file, which may be found in
the same folder where the images are stored, can be read
with a text editor or word processor such as Simple Text
or Notepad. The default setting for “info. txt” is “Off”.
PIC DATA/TRANSFER
Controls
Shot Confirm Lam
Pic data/Transfer
Date
Video Mode
Language
Reset All info txt
Auto Transfer
SELECT SET
Off
On
Option Description
Off
Text-format picture information not recorded (does not affect
playback photo-information display).
On Picture information recorded in text format.
The info. txt file gives the following information about the camera settings
relevant to each image in the folder:
• File number and type
• Camera type and firmware version
• Metering mode • Exposure mode
• Shutter speed • Aperture
• Exposure compensation • Focal length and digital zoom factor
• Image adjustment • Sensitivity (ISO equivalency)
• White balance • Sharpening
• Date of recording • Image size and quality
Images are listed in the order recorded, separated by a blank line.
Making Pictures for Transfer: The Auto Transfer Sub-Menu
When you connect the camera to a computer running
Nikon View and press the TRANSFER button, any images
that have been marked for transfer will automatically be
copied to the computer. The transfer menu controls
whether images are marked for transfer as they are taken.
The following options are available:
PIC DATA/TRANSFER
Controls
Shot Confirm Lam
Pic data/Transfer
Date
Video Mode
Language
Reset All info txt
Auto Transfer
SELECT SET
Off
On
Option Description
Off Pictures and movies are not marked for transfer.
On (Default setting)
Pictures and movies are marked for transfer as they are
taken.
Changing Transfer Status
Images already recorded to the CF memory card can be selected for transfer by
pressing the TRANSFER button when the image is displayed in Full-Screen
review (p. 71) or in playback mode (p. 156), or when the image is highlighted in
thumbnail review or thumbnail playback. If the image is already marked for
transfer, pressing the TRANSFER button will turn transfer marking off. The
“Transfer” option in the playback menu can be used to select all images on the
CF memory card for transfer, or to remove transfer marking from all images
(p. 174).
Marking image files for transfer
Up to 999 images on a CF memory card can be marked for transfer. Image files
of any file number can be transferred. To transfer 1000 or more images, use one
of the following methods:
1) Transfer the images using Nikon View 4, not the TRANSFER button.
2) Transfer 999 images using the TRANSFER button, and unmark the images
once they have been transferred. The mark the remaining images for transfer
and press the TRANSFER button once again.
COOLPIX885 (E) 01.10.22 6:01 PM Page 120