The assoc tab, The wireless tab – NetComm NP5400 User Manual
Page 17
Rev. 1 - YML668
www.netcomm.com.au
NP5400 11g Wireless Access Point User Guide
Page 17
The Assoc Tab
The Assoc Tab displays all the wireless clients, which are currently associated with this AP.
Mac address:
Displays the list of the MAC address of associated wireless
client.If you click the refresh button of your web browser,
then the list will be updated.
The Wireless Tab
The Wireless Tab lets you select the network settings.
Performance Mode:
In Maximum interoperability mode, the AP will accept
connections to both 802.11b and 802.11g client devices. In
Maximum performance mode, the AP will only connect to
802.11g client devices for better performance.
Wireless Network Name (SSID):
Lets you set the Service Set Identification. Default SSID is
"wireless". This should be changed to some thing non-
descriptive.
Channel:
Enables you to select a transmission channel. This setting
only works in infrastructure mode.
Transmission Rate:
Select transfer rate from an available list.
Note:
Click button "Save" to store the settings. The settings will work after AP
automatically reboots.