Nvidia MS-7374 - Manual (Page 107)

C-5
JMicron RAID
4. In the Hard Disk Disk List menu, use <Space> key to select the disks you want
to create for the RAID set, then click <Enter> key to finish selection.
5. Then select the block value (stripe value) for the RAID array by using the “upper
arrow ” or “down arrow” keys to scroll through the available values, and pressing
the <Enter> key to select and advance to the next field. The available values range
from 4KB to 128 KB. The default and typical value for RAID 0 is 128KB. (This field
only available for RAID 0 mode.)