Nvidia MS-7374 - Manual (Page 49)

3-9
BIOS Setup
Password C heck
After you set the password in BIOS Setting Password menu, this item will appear.
Selecting [setup] will request the password when enter the BIOS setup menu. Se-
lecting [always] will request the password when enter both the operating system
and the BIOS setup menu.
Primary Graphic ’s Adapter
This setting specifies which graphic card is your primary graphics adapter.
PCI Latency Timer
This item controls how long each PCI device can hold the bus before another takes
over. W hen set to higher values, every PCI device can conduct transactions for a
longer time and thus improve the effective PCI bandwidth. For better PCI performance,
you should set the item to higher values.
CPU Feature
Press <Enter> to enter the sub-menu and the following screen appears:
SVM Support (for AM2+ CPU only)
This item is used to enable or disable the AMD SVM (Secure Virtual Machine)
mode.
Chipset Feature
Press <Enter> to enter the sub-menu and the following screen appears:
HPET
The HPET (High Precision Event Timers) is a component that is part of the chipset.
You can to enable it, and will provide you with the means to get to it via the
various ACPI methods.
On-Chip VGA
This item is used to enable or disable the on-chip VGA.
VGA Share Memory Size
The system shares memory to the on-chip VGA. This setting controls the exact
memory size shared to the on-chip VGA.