Netopia 4622 T1 - Manual (Page 20)

4-6 Getting Started Guide
Static configuration (optional)
3. In the TCP/IP window or in the MacTCP/More window, select or type information into the fields as shown in
the following table.
4. Close the TCP/IP or MacTCP control panel and save the settings.
5. If you are using MacTCP, you must restar t the computer. If you are using Open Transpor t, you do not need
to restar t.
Option: Select/Type:
Connect via: Ethernet
Configure: Manually
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
Router or Gateway address: 192.168.1.1
Name ser ver address: Enter the primar y and secondar y name ser ver
addresses given to you by your ISP
Implicit Search Path:
Star ting domain name: Enter your domain name; if you do not have a
domain name, enter the domain name of your ISP
If you are manually configuring for a fixed or static IP address,
per form the following:
1. Go to the Apple menu. Select Control Panels and then
TCP/IP or MacTCP.
2. With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Advanced and click OK.
Or, in the MacTCP window, select Ethernet and click the
More button.