Netopia 4622 T1 - Manual (Page 33)

Easy Setup 6-7
7. Select Channel Data Rate and highlight the data rate that your ser vice provider has designated your
channel to connect at. The channel data rate choices are Nx56k or Nx64k. The default is Nx64k. Press
Return.
8. Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the
pop-up menu. The choices offered are PPP, RFC1483, HDLC (Cisco), and Frame Relay. The default setting
is Frame Relay.
The screen will offer different options depending on your selection.
■ If you selected Frame Relay as a Data Link Encapsulation method, the PPP over Frame Relay Enabled
toggle appears.
If you toggle PPP over Frame Relay Enabled to On, the DLCI field appears, allowing you to enter a DLCI
value (16 is the default). The LMI option also appears, allowing you to select from ANSI (Annex D),
CCITT (Annex A), LMI, or None from the pull-down menu.
■ If you selected PPP, the next pop-up menu PPP Mode offers the choice of VC Multiplexed or LLC SNAP.
T1 Line Configuration
Operation Mode... Normal
Line Encoding... B8ZS
Framing Mode... ESF
Number of DS0 Channels: 1
First DS0 Channel: 1
Channel Data Rate... Nx64k
Data Link Encapsulation... RFC1483
RFC1483 Mode... Bridged 1483
PPP over Ethernet (PPPoE): Off
TO MAIN MENU NEXT SCREEN
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.
T1 Line Configuration
Operation Mode... Normal
Line Encoding... B8ZS
Framing Mode... ESF
Number of DS0 Channels: 1
First DS0 Channel: 1
Channel Data Rate... Nx64k
Data Link Encapsulation... PPP
PPP Mode... VC Multiplexed
TO MAIN MENU NEXT SCREEN
Return/Enter takes you back to previous screen.
Enter Information supplied to you by your telephone company.
PPP Options Frame Relay Options
T1 Line Configuration
Operation Mode... Normal
Line Encoding... B8ZS
Framing Mode... ESF
Number of DS0 Channels: 1
First DS0 Channel: 1
Channel Data Rate... Nx64k
Data Link Encapsulation... Frame Relay
PPP over Frame Relay Enabled: On
DLCI: 16
LMI: None
TO MAIN MENU NEXT SCREEN
Return/Enter takes you back to previous screen.
Enter Information supplied to you by your telephone company.
RFC 1483 Options
T1 Line Configuration
Operation Mode... ATM
Line Encoding... B8ZS
Framing Mode... ESF
Number of DS0 Channels: 1
First DS0 Channel: 1
Data Link Encapsulation... RFC1483
RFC1483 Mode... Bridged 1483
PPP over Ethernet (PPPoE): Off
Data Circuit VPI (0-255): 0
Data Circuit VCI (32-65535): 35
TO MAIN MENU NEXT SCREEN
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.
ATM Operation Mode Options