Netopia 4622 T1 - Manual (Page 9)

Making the Physical Connections 2-3
Identify the Connectors and Attach the Cables
Identify the connectors and switches on the back panel and attach the necessar y Netopia Router cables.
The figure below displays the back of the Netopia 4622 T1 Router.
Power WAN
2 T1
3 1 Ethernet Power
1 Computer
1 Netopia Router
Console
Ethernet 8
1
Connect your computer, T1
line, and power source as
shown.
1. For a direct computer to
router Ethernet connection,
use a standard Ethernet
cable, or connect through a
hub or switch with a
standard Ethernet cable.
2. Use the supplied line
cable to connect the router
to your T1 wall outlet.
3. Connect the supplied
power brick to a power outlet
and the mini-DIN8 connector
end to the router.