Nortel Networks 4134 - Manual (Page 16)

16
CS 1000 Configuration
This section describes the configuration steps needed on CS 1000 components like SLG,
SSG and SPS for SR 2330/4134 based branch solution. There is no SR 2330/4134 specific
configuration required on CS 1000. Please refer to CS 1000 user guides for the detailed
configuration steps. The following diagram complete with IP addresses will be used as
reference for the configuration chapters.
SLG Configuration
Please refer to CS 1000 NN43001-508 SIP Line Fundamentals document for detailed
information on SLG configuration. There is no Secure Router specific configuration need to
done on SLG.
Steps
1. SIP Line (SIPL) feature depends on the following packages to be enabled in keycode.