Nortel Networks 4134 - Manual (Page 35)

35
SR 2330/4134 Configuration
This section describes the configuration steps needed for SR 2330/4134 for CS 1000 branch
solution. The following diagram complete with IP addresses will be used as reference for this
chapter.
For configuration details on SSM, please refer to Secure Router Release 10.2 guide
NN47263-510 Configuration — SIP Survivability.
For configuration details on SIP Gateway (SIP GW) please refer to Secure Router Release
10.2 guide NN47263-508 Configuration — SIP Media Gateway.
Steps
1. Configure the Ethernet interface for connection to the SIP server and SIP phones:
configure terminal
interface ethernet 0/1
ip address 100.20.42.80 255.255.255.224
exit ethernet