National Instruments Isolated Analog Input Modules SCC-AI03 - Manual

USER GUIDE
SCC-AI Series Isolated Analog
Input Modules
The SCC-AI Series isolated analog input modules can extract a relatively
low-amplitude input signal from a high-common-mode voltage so the
E/M Series DAQ device can measure the input signal. They also can
amplify and filter the input signal, resulting in higher measurement
resolution and accuracy.
SCC-AI Series modules are available in a range of gains from 0.2 to 200.
They contain lowpass filters of either 10 kHz or 4 Hz bandwidth. Table 1
gives the gain and bandwidth for each module.
Table 1. SCC-AI Module Input/Output Range, Gain, and Bandwidth
Model Input Range Output Range Gain Bandwidth
SCC-AI01 ±42 V
pk
/ VDC ±8.4 V 0.2 10 kHz
SCC-AI02 ±20 V ±10 V 0.5 10 kHz
SCC-AI03 ±10 V ±10 V 1 10 kHz
SCC-AI04 ±5 V ±10 V 2 10 kHz
SCC-AI05 ±1 V ±10 V 10 10 kHz
SCC-AI06 ±100 mV ±10 V 100 10 kHz
SCC-AI07 ±50 mV ±10 V 200 10 kHz
SCC-AI13 ±10 V ±10 V 1 4 Hz
SCC-AI14 ±5 V ±10 V 2 4 Hz