Isolation voltage, Environmental, Safety – National Instruments Isolated Analog Input Modules SCC-AI03 User Manual
Page 11: Electromagnetic compatibility
© National Instruments Corporation
11
SCC-AI Series Isolated Analog Input Modules User Guide
Isolation Voltage
Channel-to-earth isolation
Continuous ...................................... 60 VDC,
Measurement Category I
Withstand ........................................ 2300 V
rms
verified by a 5 s
dielectric withstand type test
Channel-to-channel ................................ Nonisolated
1
Environmental
Operating temperature............................ 0 to 50
°C
Storage temperature ............................... –20 to 70
°C
Humidity ................................................ 10 to 90% RH, noncondensing
Maximum altitude .................................. 2,000 m
Pollution Degree (indoor use only) ........ 2
Safety
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
1
The SCC
-
AI does not provide isolation between the two channels of the module. For more information, refer
to the
section.