Nikon LS4000 - Manual (Page 118)

108
6 Align the frame you want to scan with
either of the two apertures (see page
110 for information on scanning
frames in order, starting at the first
frame).
7 After confirming that the scanner is
ready (the scanner is ready when the
status LED is not blinking), insert the
MA-20 (S) slide-mount adapter into
the scanner.
Inserting the MA-20 (S)
Open the sliding cover on the front of the scanner and slide the MA-20 (S) smoothly into the
adapter slot until it is fully inserted. The status LED will blink a few times and then glow steadily.
Apertures