Nikon LS4000 - Manual (Page 152)

142
Remove dust and dirt from the interior of the adapter with a blower. Clean the feed mecha-
nism thoroughly, changing the angle of the blower to reach all parts of the mechanism. Be
sure that dirt and dust do not remain on the adapter’s three sensors.
Caring for the FH-3 Film Holder
When cleaning the holder, do not use volatile cleaners such as alcohol or paint thinner. Use a
blower to remove dust. Clean dirt from the holder with a soft dry cloth, or dampen the cloth with
a neutral detergent to remove particularly stubborn stains, drying once cleaning is complete.
Caring for the MA-20 (S) Slide Mount Adapter
When cleaning the adapter, do not use volatile cleaners such as alcohol or paint thinner. Use a
blower to remove dust. Clean dirt from the adapter with a soft dry cloth, or dampen the cloth
with a neutral detergent to remove particularly stubborn stains, drying once cleaning is complete.