Accessories – Nikon LS4000 User Manual

Page 14

Advertising
background image

En

4

Accessories

After unpacking the scanner, check that the package contains all the items listed below. Con-
tact your retailer immediately should you find that anything is missing or damaged.

IEEE 1394/Firewire interface board (1)

(includes user’s manual)

(4000 ED only)

If you are using a Windows or old-model (beige)
Macintosh G3 desktop computer, you may need
to install this PCI board before you will be able
to connect your scanner to your computer. This
board can not be used with laptop computers
or computers not equipped with a PCI slot, and
is not required in the case of Macintosh com-
puters with built-in Firewire ports.

IEEE 1394/Firewire interface cable (1)

(4000 ED only)

Use this cable to connect the 4000 ED to your
computer.

USB interface cable (1)

(COOLSCAN IV ED only)

Use this cable to connect the COOLSCAN IV ED
to your computer.

Power cable (1)

(shape of cable depends on country of sale)

MA-20 (S) slide-mount adapter (1)

Use this adapter to scan mounted slides, or with
the FH-3 to scan strip film too short or too badly
damaged to be used in the SA-21.

FH-3 strip-film holder for MA-20 (S) (1)

Place strip film to be scanned in this holder
before scanning it with the MA-20 (S).

SA-21 strip-film adapter (1)

This adapter can be used to scan single or mul-
tiple selected frames in film strips two to six
frames in length. The frames to be scanned
can be previewed and selected using Nikon
Scan.

Advertising
This manual is related to the following products: