Nikon LS4000 - Manual (Page 21)

En
11
Installing the Device Drivers (Windows Only)
After installing the interface board, close the computer’s case and reconnect all cables.
Windows XP Home Edition/Windows XP Professional
The first time the computer is powered on with the board in place, Windows will automatically
install the necessary drivers. To confirm that the drivers have been installed and are functioning
normally:
1 Select Control Panel from the Start
menu and click the Performance and
Maintenance icon. In the Performance
and Maintenance window, click the
System icon.
2 The System dialog will be displayed.
Select the Hardware tab and click Device
Manager….
3 Confirm that a listing for “NEC
Firewarden OHCI Compliant IEEE 1394
Host Controller” appears in the Device
Manager.