Connecting the camera to a printer, E26) – Nikon Coolpix S9300 User Manual
Page 146
E
26
Connecting the Camera to a Printer (Direct Print)
Re
fere
nce
S
e
cti
o
n
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
• Check the printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4
The camera is automatically turned on.
• When connected correctly, the PictBridge startup screen (1) is displayed on the
camera monitor. Then the Print selection screen (2) is displayed.
B
If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (
the camera’s setup menu to Off and reconnect the cable.
1
2
32
32
NO.
Print selection
15/05
2012