Nikon Coolpix S9300 - Manual (Page 182)

E 62
GPS Options (COOLPIX S9300 only)
Re
fere
nce
S
e
cti
o
n
4
Select Save log, and press the
k button.
• The log data is saved to a memory card.
B
Notes on Log Recording
• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off unexpectedly during log
recording. When the battery power becomes exhausted, log recording ends.
• Log recording ends due to the operation below, even when there is time remaining for log
recording.
- The USB cable is connected.
- The battery is removed.
- Record GPS data in GPS options is set to Off (same as when Reset all is performed).
- The setting of the internal clock (time zone or date and time) is changed.
• Log recording is paused during the operations below.
- During continuous shooting
- During movie recording
• If time for log recording still remains even when the camera is turned off, log recording is
continuously performed until the preset time has elapsed.
• The log data is temporarily stored in the camera. New logs cannot be recorded if the log data
remains in the camera. After recording log data, save it to a memory card.
• A maximum of 36 log data events can be recorded in one day.
• A maximum of 100 log data events can be saved to a single memory card.
C
To Erase Log Data
• To erase the log data that is temporarily stored in the camera, select Erase log in step 4.
• To erase the log data that is stored in the memory card, press the l button in View log (E63).
C
Log Data
Log data is NMEA format-compliant. However, display in all NMEA format-compliant software or on
all NMEA format-compliant cameras is not guaranteed.
Erase log
Save log
End log