Troubleshooting, F 11, Power, display, settings issues – Nikon Coolpix S9300 User Manual

Page 227

Advertising
background image

Techn

ical
Not

e

s and Inde

x

F

11

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
See “Error Messages” (

E92) for more information.

Power, Display, Settings Issues

Problem

Cause/Solution

A

The battery
inserted in the
camera cannot be
charged.

Confirm all connections.

16,
18

The battery cannot
be charged by
connecting the
camera to a
computer.

• Off is selected for Charge by computer in the setup menu.
When charging by connecting the camera to a computer,

battery charging stops when the camera is turned off.

When charging by connecting the camera to a computer,

battery charging stops when the computer is suspended
(sleeping), and the camera may turn off.

Depending upon computer specifications, settings, and status,

charging the battery inserted in the camera may not be
possible via computer connection.

102,

E80

E80

E80

Camera cannot be
turned on.

Battery is exhausted.
The camera cannot be turned on while connected to an

electrical outlet via the Charging AC Adapter.

20
16

Camera turns off
without warning.

Battery is exhausted.
If no operations are performed for a while, camera has turned

off automatically by auto off to save power.

The camera turns off if the Charging AC Adapter is connected

while the camera is on.

The camera turns off if the USB cable connecting it to a

computer or printer is disconnected. Reconnect the USB cable.

Inside of the camera has become hot. Leave the camera off

until the inside of the camera has cooled.

At low temperatures, the camera and the battery may not

function normally.

20
21

16

82, 85,
E26

F3

Monitor is blank.

Camera is off.
Battery is exhausted.
Standby mode for saving power: Press the power switch,

shutter-release button,

c button or b (e movie-record)

button, or rotate the mode dial.

When flash lamp flashes, wait until flash has charged.
Camera and computer are connected via USB cable.
Camera and TV are connected via audio/video cable or HDMI

cable.

21
20
21

60
82, 85
82,

E23

Advertising
This manual is related to the following products: