Troubleshooting, F 11, Power, display, settings issues – Nikon Coolpix S9300 User Manual

Page 227

Advertising
background image

Techn

ical
Not

e

s and Inde

x

F

11

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
• See “Error Messages” (

E92) for more information.

Power, Display, Settings Issues

Problem

Cause/Solution

A

The battery
inserted in the
camera cannot be
charged.

• Confirm all connections.

16,
18

The battery cannot
be charged by
connecting the
camera to a
computer.

• Off is selected for Charge by computer in the setup menu.
• When charging by connecting the camera to a computer,

battery charging stops when the camera is turned off.

• When charging by connecting the camera to a computer,

battery charging stops when the computer is suspended
(sleeping), and the camera may turn off.

• Depending upon computer specifications, settings, and status,

charging the battery inserted in the camera may not be
possible via computer connection.

102,

E80

E80

E80

–

Camera cannot be
turned on.

• Battery is exhausted.
• The camera cannot be turned on while connected to an

electrical outlet via the Charging AC Adapter.

20
16

Camera turns off
without warning.

• Battery is exhausted.
• If no operations are performed for a while, camera has turned

off automatically by auto off to save power.

• The camera turns off if the Charging AC Adapter is connected

while the camera is on.

• The camera turns off if the USB cable connecting it to a

computer or printer is disconnected. Reconnect the USB cable.

• Inside of the camera has become hot. Leave the camera off

until the inside of the camera has cooled.

• At low temperatures, the camera and the battery may not

function normally.

20
21

16

82, 85,
E26
–

F3

Monitor is blank.

• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: Press the power switch,

shutter-release button,

c button or b (e movie-record)

button, or rotate the mode dial.

• When flash lamp flashes, wait until flash has charged.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via audio/video cable or HDMI

cable.

21
20
21

60
82, 85
82,

E23

Advertising
This manual is related to the following products: