National Instruments VXI-1394 - Manual (Page 39)

© National Instruments Corporation B-1 VXI-1394 User Manual for Windows
B
Default Settings
This appendix summarizes the default settings for the hardware and
software in the VXI-1394 kit. If you need more information about a
particular setting, or if you want to try a different configuration, refer
to Appendix C,
Advanced Hardware Configuration Settings , for your
hardware reference and to the MAX online help for your software
reference.
Note There are no hardware settings on the PCI-1394 board.
Hardware Settings
Table B-1. VXI-1394 Hardware Default Settings
Hardware Component Default Setting
W1—VXIbus Slot 0/Non-Slot 0 Automatic detection
S6—VXIbus CLK10 source From onboard oscillator
S5—External trigger termination OFF: unterminated
S3—SMB CLK10 direction IN: receive CLK10 signal
S2—SMB CLK10 termination OFF: ignored
S4—Polarity of external SMB
CLK10 Inverted
S7— Configuration EEPROM Do not load from factory setting