Nortel Networks 2004 - Manual (Page 102)

Additional call features
102
Answering a call camped-on to your extension:
Override a busy signal
Use the Override feature to override a busy signal and interrupt another
call.
To override a busy/engaged signal:
When your telephone rings, lift the
handset.
Note: You can program your telephone
for either Camp-on or Call Waiting, but
not both.
1. Dial a telephone number and receive a
busy signal.
2. Choose one of the following:
— Press the Override key.
— Enter the Override FFC. The people
in the targeted call receive a tone for
approximately one second. After
Override feature joins you to their
call, a short tone repeats every 16
seconds.
3. To terminate the call, press the
Goodbye key.
(Goodbye)