Nortel Networks 3100 - Manual (Page 50)

Advanced functions
50
Figure 12: Direct outbound mode
Direct Outbound mode requires an Outgoing Call Service DN configured
in your MCC 3100 settings. For more information, see
“System settings”
on page 26 .
When the MCC 3100 is configured for Direct Outbound mode, you can
switch from Direct Outbound mode to Call-me-First mode for advanced
calls. See
“Advanced call” on page 52 .
Call-me-First mode
In Call-me-First mode, your calls are completed in two steps. First the
enterprise telephony system calls you. After you answer, the enterprise
telephony system calls the other party. See
“Call-me-First mode” on
page 50 .
Figure 13: Call-me-First mode