NCR Customer Display NCR 5972 - Manual (Page 26)

3-2 Chapter 3: Installation
Caution: The power supply cord is used as the main disconnect
device. Ensure that the socket outlet is located/installed near the
equipment and is easily accessible.
Le cordon d’alimentation est utilisé comme interrupteur général. La
prise de courant doit etrê située ou installée a proximité du matériel et
être facile d’accés.
Installation Goal
The goal for installing the NCR 5972 Customer Display is for a
reasonably trained operator or store manager to fully install the
terminal in less than 15 minutes.
To qualify as reasonably trained an installer or store manager must be
fluent with the terminology and basic technology of PC hardware and
software. This level of knowledge can typically be found in an
individual who has installed several PC systems, and who routinely
uses a PC for personal or business computing.
Cable Requirements
Cable choices group:
• Integrated Parallel Cable (0.6 m length cable) (VFD only)
• Remote Parallel Cable (4.0 m length cable) (VFD only)
• Integrated EIA‐232 Serial Cable (0.6 m length cable) (VFD only)
• Remote EIA ‐232 Serial Cable (4.0 m length cable) (VFD only)
• Integrated Powered EIA‐232 Cable (1.0m length cable) (VFD only)
• Remote Powered EIA‐232 Serial Cable (4.0m length cable) (VFD
only)
• Integrated Powered EIA‐232