National Instruments Gigabit Ethernet Adapters - Manual (Page 11)

© National Instruments Corporation 11 PCI/PXI Gigabit Ethernet Adapters Installation Guide
3. Install the Windows NT 4.0 Ethernet drivers.
Select Start»Settings»Control Panel»Network»Adapters and click
Add, as shown in the following figure. Click Have Disk and insert the
PCI/PXI Gigabit Ethernet Adapters CD-ROM. You may also be
prompted for the original Windows NT CD-ROM.
Note Service Pack 5 or later is required for Ethernet driver installation. Advanced features
require Service Pack 6a or later.