National Instruments Gigabit Ethernet Adapters - Manual (Page 4)

PCI/PXI Gigabit Ethernet Adapters Installation Guide 4 ni.com
Windows Me/98
Complete the following steps to install the drivers:
1. Shut down, then power off the computer, as shown in the following
figure.
2. Install the hardware and cables, then power on the computer, as shown
in the following figure.
3. Install the PCI-PCI bridge driver.
Windows automatically detects the new hardware.
Follow the prompts in the Wizard. Select the recommended options
when given a choice. If Windows asks where to search for a new driver,
clear all checkboxes and click Next.