Nortel Networks Regular Telephone - Manual (Page 10)

8 Regular telephone
To charge a call using Conference or
Transfer:
1 Flash the switchhook. You hear
three beeps followed by dial tone.
Your call is put on Hold.
2 Dial SPRE 5 or CDRC FFC. The
dial tone stops.
3 Dial the charge account number.
You hear dial tone.
4 Dial the phone number.
5 If your hear ringback, hang up to
transfer the call.
or
— Wait for the call to be answered.
Flash the switchhook to establish a
three-party conference or hang up
to transfer the call.
or
— If you hear a busy signal, flash the
switchhook again to return to the
original caller.
Note: If you have a rotary dial
telephone, you must use a charge
account number with the maximum
number of digits specified by your
organization. If you have a pushbutton
telephone, you can use a number
which has fewer than the maximum
number of digits by pressing the # key
at the end of the number.