Nortel Networks Regular Telephone - Manual (Page 18)

16 Regular telephone
Override
If you place a call to a busy telephone,
Override allows you to interrupt the
call. To override a busy call:
1 After encountering a busy signal,
flash the switchhook.
2 Dial OVRD FFC.
All parties hear a one-second beep and
you are connected to the call. You
hear a beep every 16 seconds.
Note: If you are on a call and hear a
one-second beep, someone else is
using Override to interrupt your call.
Park
Use Park to put a call on Hold and
totally detach the call from your
telephone. Anyone can then answer
the call from any telephone.
To park a call:
1 Flash the switchhook or press
LINK. You hear three beeps
followed by dial tone.
2 Dial SPRE 71 or CPRK FFC. The
dial tone stops.
3 Hang up. The call is parked on
your extension.
or
— Dial the extension you want to park
the call on, then hang up. The call
is parked on the dialed extension.
To answer a parked call:
1 Lift the handset.
2 Dial SPRE 72 or CPAC FFC.
3 Dial the extension the call is parked
on. You are now connected to the
parked call.
Notes:
• If you flash the switchhook or
press LINK again before you hang
up, the park procedure is cancelled
and you are reconnected to the
caller.
• If the parked call isn’t answered
within a designated length of time,
the call returns to the telephone
that parked it.