NETGEAR DG824M - Manual (Page 32)

Reference Manual for the Model DG824M Wireless ADSL Modem Gateway
2-10 Connecting the Gateway to the Internet
• Let the DG824M auto-detect the type of Internet connection you have and configure it.
• Manually choose which type of Internet connection you have and configure it.
These options are described below. In either case, unless your ISP automatically assigns your
configuration automatically via DHCP, you will need the configuration parameters from your ISP
you recorded in
“Record Your Internet Connection Information” on page 2-4 .
Procedure 2-3: Auto-Detecting Your Internet Connection Type
The Web Configuration Manager built in to the gateway contains a Setup Wizard that can
automatically determine your network connection type.
1. If your gateway has not yet been configured, the Setup Wizard shown in Figure 2-6 should
launch automatically.
Note: If, instead of the Setup Wizard menu, the main menu of the gateway’s Configuration
Manager as shown in
Figure 2-11 appears, click the Setup Wizard link in the upper left to
bring up this menu.
When the Wizard launches, select Yes in the menu below to allow the gateway to
automatically determine your connection.
Figure 2-6: Built-in Web-based Configuration Manager Setup Wizard
2. Click Next
The Setup Wizard will now check for the following connection types:
• Dynamic IP assignment
• A login protocol such as PPPoE or PPPoA