Radio Shack CT-503 - Manual (Page 28)

28
5. When you hear the ringer style you want to use, press
to select it. The phone displays ringEr n SEt
(where n is the number of the ringer style you selected).
6. Press to exit the function menu.
Using Automatic Answer
The automatic answer function lets you set the phone to au-
tomatically answer incoming calls without you having to press
a key. When automatic answer is enabled and the phone re-
ceives a call, it rings twice then automatically answers the
call. Begin your conversation as usual.
Follow these steps to turn the automatic answer function on
or off.
1. Press .
2. Repeatedly press or until Auto AnSr OFF or
On appears.
3. Press so On appears (to enable) or so OFF
appears (to disable).
4. Press to exit the function menu.
Note: If automatic answer is enabled and you set the phone
to use a ringer style such as number 6 (see “Changing the
Ringer Style” on Page 27), which sounds four chirps per ring,
remember that the phone answers only after two
rings (two
sets of four chirps, in this case).
STO
END
FCN 1
#
STO CLR
END
17-1112.fm Page 28 Wednesday, July 21, 1999 2:34 PM