Radio Shack CT-503 - Manual (Page 52)

52
• You can connect or disconnect the headset without
affecting a call in progress.
• also controls the connected headset’s volume (see
“Adjusting the Volume” on Page 19).
USING TOUCH-TONE SERVICES
To use your cellular phone to control answering machines
and special telephone services (such as bank-by-phone or
voicemail), simply enter touch-tone commands using your
phone’s keypad after the service answers (and when prompt-
ed).
Or, you can store the service’s command sequence in a
memory location, then follow these steps after the service an-
swers (for each sequence you want to send).
1. Recall the memory location that contains the command
sequence.
2. Press .
Adding a Pause
Some services, such as voicemail, require you to enter an ac-
cess code then wait before entering additional digits. To in-
clude one or more pauses in a sequence when storing it in
memory, press
so o appears, then press . The
phone displays o wherever you insert a pause.
Note: If you do not press within 8 seconds, the display
clears to conserve battery power. If this happens, simply
press the key for the next digit you want to enter or store. The
characters you previously entered appear along with the
pause you just entered.
VOL
RCL SND
FCN SND STO
STO
17-1112.fm Page 52 Wednesday, July 21, 1999 2:34 PM