Radio Shack CT-503 - Manual (Page 31)

31
USING MEMORY
Your phone has 40 speed-dial memory locations that can
each hold a phone number of up to 32 digits.
STORING SPEED DIAL NUMBERS
Note: If you are unable to complete Steps 2 and 3 within 2
minutes, the phone exits the procedure and its display goes
blank to conserve battery power. Press
, then start
over at Step 2.
1. Clear the display (if necessary), enter the phone number
you want to store, then press . The phone displays
LocAtn (location) _ _ .
2. Within 2 minutes, enter the two-digit memory location
number (01–40) where you want to store the phone
number. The display confirms the memory location you
have chosen.
Notes:
• Remember that your phone uses memory location 01
for one-touch emergency dialing. Store only your local
emergency number (such as 911) in that location.
• If you enter an invalid number (such as 41), the phone
displays invALid LocAtn , then LocAtn _ _
reappears. Try again.
3. If you previously stored information in the selected mem-
ory location, or if the phone’s memory is full, the selected
location number and
FULL appear briefly, then the
phone displays the currently stored number followed by
ChAngE? .
To select a different memory location , press ,
enter the new memory location number, then press .
END STO
STO
END STO
STO
17-1112.fm Page 31 Wednesday, July 21, 1999 2:34 PM