Radio Shack CT-503 - Manual (Page 41)

41
Notes:
• If the message stack is full (20 messages are currently
stored) and the phone receives a new message, it auto-
matically stores the new message and deletes the oldest
message in the stack.
• Your phone does not receive messages while it is turned
off. Contact your cellular carrier to find out how the car-
rier handles undeliverable/queued messages.
Viewing/Recalling Messages
Follow these steps to view or recall a message.
1. Press and release , then hold it down for about 1
second. The phone displays the first (newest) message
in the stack.
If the message is a calling line ID message , the phone
briefly displays cId yy (where yy is the message num-
ber) then the number of the party that called (up to 14
characters).
If the message is voice mail notification , the phone dis-
plays the message data (such as a message number
and/or number of total/new messages waiting) sent by
your cellular carrier. The type and format of the message
waiting information sent varies by carrier — contact your
cellular carrier for more information.
Note: If there are no messages in the stack, the phone
displays
noMSgS for about 8 seconds then exits the
message display. To exit sooner, press .
RCL
CLR
17-1112.fm Page 41 Wednesday, July 21, 1999 2:34 PM