Radio Shack CT-503 - Manual (Page 47)

47
Your phone’s selectable system registration function lets you
select one of seven possible roaming modes:
Roaming Mode Description Display
Standard Mode — the phone first seeks a home type
system, then it seeks a non-home type.
If you are using a type A (non-wireline) home system Std Ab
If you are using a type B (wireline) home system Std bA
Invert Preference Mode — the phone first seeks a
non-home type system, then it seeks a home type.
(Select this setting while on the fringe of your home
area or in certain roaming situations.)
If your home system is non-wireline (type A):
• RM flashes rapidly — call on system B
• RM flashes slowly — call on home type system
• IU flashes slowly — call on home system
SCAn
bA
If your home system is wireline (type B):
• RM flashes rapidly — call on system A
• RM flashes slowly — call on home type system
• IU flashes slowly — call on home system
SCAn
Ab
Home Only Mode — the phone will not operate out-
side your home system. HOME
Scan A Mode — the phone will operate only within
non-wireline (A) systems. SCAn A
Scan B Mode — the phone will operate only within
wireline (B) systems. SCAn b
SID Mode — the phone automatically scans for one
or more preferred systems to use and one or more
systems not to use. System IDs must be prepro-
grammed by dealer; preferred system (SID) feature
requires special service (contact your cellular car-
rier). P SCAn
17-1112.fm Page 47 Wednesday, July 21, 1999 2:34 PM