RuggedCom RS1600 - Manual (Page 25)

Chapter 2 - Configuring MAC Management
Viewing MAC Addresses
The View MAC Addresses command presents a real time display of learned and
static MAC addresses.
Figure 8: MAC Addresses Menu
The display will change as MAC addresses are learned and aged out.
My Switch MAC Addresses Admin Access
MAC Address VID Port Type CoS
00-00-85-05-9A-C4 1 6 Dynamic Normal
00-01-E6-64-2B-B6 1 6 Dynamic Normal
00-03-47-A0-56-F3 1 6 Dynamic Normal
00-03-47-A0-57-37 1 6 Dynamic Normal
00-03-47-B0-59-F3 1 6 Dynamic Normal
00-06-5B-61-AC-30 1 6 Dynamic Normal
00-06-5B-7A-40-BA 1 6 Dynamic Normal
00-06-5B-95-B2-A4 1 6 Dynamic Normal
00-06-5B-A2-51-41 1 6 Dynamic Normal
00-06-5B-AF-1A-AA 1 6 Dynamic Normal
00-06-5B-AF-1A-AD 1 6 Dynamic Normal
00-0A-DC-00-20-00 1 6 Dynamic Normal
00-0A-DC-01-01-0E 1 6 Dynamic Normal
00-0A-DC-01-01-1E 1 6 Dynamic Normal
00-50-BA-D4-48-16 1 6 Dynamic Normal
00-50-BA-F4-E8-EB 1 6 Dynamic Normal
00-C0-4F-6C-D9-1B 1 6 Dynamic Normal
00-E0-18-BB-B4-CA 1 6 Dynamic Normal
More below ...
<CTRL>
Z-Help S-Shell D-PgDn U-PgUp
MAC Address
The learned MAC address.
VID
The VLAN the MAC address was learned upon.
Port
The port the MAC address was learned upon.
Type
Either “Static” or “Dynamic”, this parameter describes how the switch has learned
the MAC address. Dynamic addresses are learned from received frames. Static
addresses are learned from configured entries in the Static MAC Address Table.
CoS
The Class of Service associated with this MAC Address. CoS and its use is more
fully described in Chapter 5 – Configuring Class of Service.
RuggedCom 11