RuggedCom RS1600 - Manual (Page 94)

RuggedSwitch
™ User Guide
• The ability to collect historical statistics in order to review performance and
operation of Ethernet ports.
• The ability to record a log entry and/or generate an SNMP trap when the
rate of occurrence of a specified event is exceeded.
These capabilities are provided through the following menus:
• RMON History Control Table – This menu controls the periodic statistical
sampling of data and corresponds to the RFC 2819 (RMON-MIB) History
Group.
• RMON History Samples Table – Reached through the History control
menu, this menu provides the ability to view collected history samples of
statistics on the Ethernet interface. These samples corresponds to the RFC
2819 (RMON-MIB) Ethernet History Group.
• RMON Alarms Table – Monitors a specific management information base
(MIB) object for a specified interval, generates an alarm at a specified value
(rising threshold or falling threshold). Alarms are logged in the switch
alarm menu and can be used to triggers RMON events.
• RMON Events Table – Determines the action to take when an event is
triggered by an alarm. The action can be to generate a log entry and/or an
SNMP trap.
• RMON Events Logs Table - Reached through the RMON Events Table
menu, this menu provides the ability to view collected logs.
RuggedCom