Roland RG-3M - Manual (Page 101)

99
Chapter 6. Changing Various Settings
Muting or Reducing the Volume of
a Specific Part (Minus One/Guide)
You can temporarily mute any specific part.
This temporary muting of a specified part is called “Minus
One.”
You can also set a specific part to play at a lower volume.
This allows you to use the sound of that part as a “guide” for
your own performance.
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [ ] (Select
+) button to display the PLAY screen.
fig.06-180d
3. Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “Minus One” to
flash.
fig.06-181d
4. Press the [ ] (Value -) button or [ ] (Value
+) button to switch the Minus One/Guide
function on and off.
5. Press the [Function] (Exit) button so the indicator
goes out.
Setting the Part To Be Muted/Guide Part
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [ ] (Select
+) button to display the “MISC MinusOne/
Guide” screen.
fig.06-190d
3. Press the [Moving Key] (Enter) button.
4. Press the [Song] (Select -) button or [ ] (Select
+) button to select the part to be muted.
fig.06-200d
5. Press the [ ] (Value -) button or [ ] (Value
+) button to switch the mute or guide function on
or off.
fig.06-201d
The [ ] indication appears next to the part number of a
muted or guide part.
→ Performances recorded on the RG-3M are saved to Part 1. In
Split performances, however, the right-hand performance is
recorded to Part “4,” while the left hand is recorded to Part
“3.”
6. Repeat steps 4 and 5 as required.
7. After specifying the muted or guide part, press
the [Function] (Exit) button.
This confirms selection of the muted or guide part.
8. Press the [Function] (Exit) button so the indicator
goes out.
Value Description
Guide
The volume of the specified part is re-
duced.
Set the part to be played at the lower vol-
ume with the procedure described in “Set-
ting the Part To Be Muted/Guide Part” (p.
99).
Mute
The specified part is muted.
Set the part to be muted in “Setting the Part
To Be Muted/Guide Part” (p. 99).
Off
The Minus One/Guide function is
switched off.
Value Description
R Rhythm Part
1
User Part (Part to which performance re-
corded with the RG-3M is saved)
2 Accompaniment Part
3 Left-hand Part
4 Right-hand Part
RG-3M_e3.book 99 ページ ２００８年３月２５日 火曜日 午前１０時１分