Roland RG-3M - Manual (Page 96)

94
Chapter 6. Changing Various Settings
Functions Assigned to the TRANSPOSE [-]
and [+] Buttons
5. Press the [Function] (Exit) button so the indicator
goes out.
Changing the CD Settings
■ Adjusting CD and Audio File
Levels
Use this procedure to adjust the volume level of the CD or
audio file when playing back a CD or audio file.
→ You can use the Memory Backup function to store these
settings to the RG-3M (p. 75).
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [ ] (Select
+) button to display the CD/AUDIO screen.
fig.06-110d
3. Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “Level” to flash.
fig.06-120d
4. Press the [ ] (Value -) button or [ ] (Value
+) button to adjust the playback volume of the
CD or audio file.
5. Press the [Function] (Exit) button so the indicator
goes out.
Value Description
Transpose
Transposes the key of the song being
played.
Press the TRANSPOSE [-] button to
lower the key; press the TRANSPOSE
[+] button to raise the key.
Bwd/Fwd
Fast forwards and rewinds the song.
When TRANSPOSE [-] is pressed, the
song rewinds; when TRANSPOSE [+]
is pressed, the song is fast forwarded.
CD Volume
Changing the volume of the Song on
CDs (p. 94).
Press the TRANSPOSE [-] button to de-
crease the volume, and press the
TRANSPOSE [+] button to increase the
volume.
CD Sync
This adjusts the timing of the piano
accompaniment during playback of
Player Piano CDs (p. 95).
When TRANSPOSE [-] is pressed, the
piano sound is played earlier; when
TRANSPOSE [+] is pressed, the piano
sound is played later.
Value Description
0–127 Raising the value increases the volume level.
RG-3M_e3.book 94 ページ ２００８年３月２５日 火曜日 午前１０時１分