Appendices, Troubleshooting – Roland RG-3M User Manual

Page 113

Advertising
background image

111

Appendices

Troubleshooting

Case

Cause/Remedy

The power doesn’t come on

Is the power cord connected and plugged in correctly? (p. 19)

Depressing a pedal has no
effect, or the pedal effect
doesn’t stop

Is the pedal connected correctly?
Make sure the pedal cord is securely connected to the pedal connector (p. 19).
Has a different function been assigned to the pedal?
See “Assigning Functions to Pedals” (p. 72).

The volume level of the in-
strument connected to Input
jacks is too low

Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.

Low hum coming from
external device

Do you have different external devices plugged into different power outlets?
When connecting external devices, always draw power from the same outlet.

Unable to load properly with
USB memory

Is the USB memory you are using one that was produced by Roland?
Performance is not guaranteed when other types of USB memory are used.

Connected Television or External Display Screen Looks Odd

Images not shown on external
display or television when
external display or television
is connected

Is the external display or television properly connected? (p. 47, p. 49)
Is the external display’s power turned on?
Are you using a display that is compatible with the RG-3M?
Refer to “Displays That Can Be Connected to This Instrument” (p. 47).
Is the television format or display setting correct? (p. 48, p. 49)

Thin horizontal lines visible
in the television screen

While narrow horizontal lines may be visible in the television screen, this is a particular char-
acteristic of the television set and does not indicate any problem with the RG-3M.

Poor-quality of images
displayed in television

Even when all recommended settings are used, images may still not be displayed well with
the television set you are using (images may not match the screen size, and may be clustered
towards the center of the screen).

No sound is heard

No sound is heard

Is the volume level of the RG-3M (p. 20) or connected device turned all the way down?
Are headphones plugged in? (p. 21) Has a plug remained connected to the Phones jack?
When headphones or plugs are connected, the keyboard’s speakers stop playing.
Could the keyboard volume be turned down completely in the volume balance settings?
(p. 74)
Could the levels of all frequency ranges be turned down completely in the equalizer settings?
(p. 62)
Is V-LINK switched on? While V-LINK is switched on, no sound is produced when you press
any of the twelve keys at the left end of the keyboard (p. 98).

No sound is heard
(when a MIDI instrument is
connected)

Have all devices been switched on?
Are the MIDI cables connected correctly? (p. 104)
Does the MIDI channel match the connected instrument? (p. 106)

No sound is heard when the
keyboard is played

Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is produced by playing the keyboard. Set Local
Control to On (p. 107).

Not all played notes are
sounded

The maximum number of notes can play simultaneously is 128.
Frequent use of the damper pedal during playing along with a song may result in perfor-
mance data with too many notes, causing some notes to drop out.

The sound is strange

Sounds are heard twice (dou-
bled) when the keyboard is
played

Do you have the Layer tone selected? (p. 56)
When the RG-3M is connected to an external sequencer, set it to the Local Off mode (p. 107).
Alternatively, the sequencer could be set so its Soft Thru feature is Off.

The tuning or pitch of the
keyboard or song is off

Have you set transpose? (p. 37, p. 63)
Are the settings for the “Temperament” and “Stretch Tuning” correct? (p. 67, p. 66)
Is the setting for the “Master Tune” correct? (p. 65)

Reverberation still audible
even with Reverb turned off

Since the RG-3M’s piano sounds accurately reproduce the depth and reverberation of the orig-
inal acoustic piano, you may find that reverberation is audible when the Key Off Resonance
function is enabled. If you want to eliminate the reverberation, turn off the Key Off Resonance
function (p. 59).

RG-3M_e3.book 111 ページ 2008年3月25日 火曜日 午前10時1分

Advertising