Roland RG-3M - Manual (Page 41)

39
Chapter 1. Playing Back Songs
■ Adding Echo to the Mic Vocals (Mic Echo)
This adjusts the microphone echo when a microphone is connected to the
RG-3M.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the MIC ECHO screen.
fig.01-160d
3.
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “Type” to flash.
fig.01-170d
4.
Press the [ ] (Value -) button or [ ] (Value +) button to
change the echo type.
5.
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “Level” to flash.
fig.01-180d
6.
Press the [ ] (Value -) button or [ ] (Value +) button to
change the amount of echo applied to the sound.
7.
Press the [Function] (Exit) button so the indicator goes out.
Value Description
1 Adds basic reverberations.
2 Adds reverberations for a karaoke-type echo.
Value Description
0–9
More echo is applied as the value is increased.
No echo is applied to the microphone vocals when the value is
set at “0.”
RG-3M_e3.book 39 ページ ２００８年３月２５日 火曜日 午前１０時１分