Roland RG-3M - Manual (Page 89)

87
Chapter 5. User Program Registration
7.
Press the [Moving Key] (Enter) button.
8.
Press the [Song] (Select -) button or [ ] (Select +) button so that
the User Program Set number is flashing.
fig.05-210d
9.
Press the [ ] (Value -) button or [ ] (Value +) button to
select the number of the User Program Set to be loaded.
10.
Press the [Moving Key] (Enter) button.
A confirmation message appears in the screen.
fig.05-220d
To return to the original screen without loading the User Program Set, press
the [Function] (Exit) button.
11.
Press the [Moving Key] (Enter) button once more.
The selected User Program Set is loaded to the RG-3M.
NOTE
When calling up User
Programs saved in USB
memory, do not remove the
USB memory from the Ext
Memory port until the
settings have been called up.
RG-3M_e3.book 87 ページ ２００８年３月２５日 火曜日 午前１０時１分